Product Description
16″ Gooseneck sensor, detects all CFC Refrigerants such as R-22, R-124, R-11 and R-12 etc.
-26%
GAS DETECTORS & ANALYSERS, REFRIGERANT GAS LEAKAGE DETECTOR, Metravi
RLD-01 Refrigerant Gas Leakage Detector
Availability:
6 in stock
- Detects all CFC refrigerants such as R-22, R-124, R-11 and R-12
- The ultra-sensitive long life sensor detects the more current, difficult-to-detect HFC refrigerants such as R-134a, R-404A, and new R-22 replacements, R-410A and R-407C.
- It’s long, slim gooseneck probe design is easy to use in close areas and for extending into hard-to-reach areas.
- It’s adjustable alarm, easy one-hand operation and impact resistance storage case add up to value and convenience
- Sensitivity to detect: 100ppm of R-134A/R-22
- Response Time < 2 sec
- Audio and Visual Alarm
9,675.00 ₹ 13,061.00 ₹
6 in stock
Technical data
Specification
Model
RLD-01
Brand
Metravi
Colour
Cream
Warranty
One year against manufacturing defects
Detecting Gases
R-11, R-12, R-124, R-22
Sensitivity
100ppm of R-134A/R-22
Sensor Type
Semiconductor Sensor
Warm-up Time
Approx 1 min
Response Time
Less then 2 sec up to 40% LEL
Alarm
Audio Alarm, Visual Alarm
Duty Cycle Range
Continuous
Power Source
Battery Operated
Related products
-
CALIBRATOR, MV MA WITH LOOP CALIBRATOR, THERMOCOUPLE CALIBRATOR, UNIVERSAL CALIBRATOR, Metravi
CAL-600 Universal Calibrator
CALIBRATOR, MV MA WITH LOOP CALIBRATOR, THERMOCOUPLE CALIBRATOR, UNIVERSAL CALIBRATOR, MetraviCAL-600 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
- Resistance Source: 15Ω ~ 400Ω
- Resistance Measurement: 0Ω ~ 400Ω
- Accuracy: ±0.2%
SKU: n/a -
CALIBRATOR, VIBRATION CALIBRATOR, Metravi
VIB-CAL-01 Handheld Vibration Calibrator
- Frequency : 159.2Hz +0.5%
- Amplitude : Acceleration : 9.81 m/s2 RMS
- Velocity : 9.81mm/sec RMS
- Displacement : 9.81 micron RMS
- Accuracy : ± 5%
- Distortion : < 3%
- Maximum load : 120 grams
- Power : 9V Rechargeable Battery (Upto 1.5 hours operation)
- Charge time : 15 hours
- Sensor Mounting base : M5 tapped hole
- Operating Temperature : 0°C to 55°C
- Operating Humidity : 90% non–condensing
SKU: n/a -
CABLE FAULT LOCATOR, DIGITAL CABLE FAULT LOCATOR, TELECOM CABLE FAULT LOCATOR, Metravi
TDRL-912 Telecom Cable Fault Locator
CABLE FAULT LOCATOR, DIGITAL CABLE FAULT LOCATOR, TELECOM CABLE FAULT LOCATOR, MetraviTDRL-912 Telecom Cable Fault Locator
- Digital Gain Adjustment Control: to make the gain adjustment very easy.
- Digital Waveform Automatic Identification technique: to make sure there is no test dead zone.
- Top-grade ARM single chip micro-computer: enables calculations and judge fault waveforms accurately.
- Display: Large colourful LCD, easy and simple to use.
- Power: High-energy Li-ion battery, provides continuous
- Working Capacity: for 10 hours (post full charge)
- Max range: 8 kms (16kms/32kms are optional)
- Highest resolution: 1m
- Dead Zone: 0m
- Power consumption: 1W
- Package includes: Fault Locator, 2 Test Lines, Charger, Carrying Bag, User Manual, CD with Software & U-Disk (only for USB function)
SKU: n/a -
CALIBRATOR, MV MA CALIBRATOR, Metravi
CAL-400-3 mV mA Calibrator
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a
