Product Description
50kV Motor operated Oil Test Set
-26%
Metravi, OIL TEST SET, MOTORISED OIL TEST SET
50-MOTS Motorised Oil Test Set
Availability:
6 in stock
- It is ideal for speedy and accurate testing of di-electric strength of transformer and circuit beaker oil under test room condition in accordance with IS:6792-1972 for oil testing.
- Input: 230V Single Phase AC 50Hz.
- Output: Continuously variable from 0 to 50kV AC with centre point of the HV winding earthed
- Capacity: Spread over a range from 500VA to 1200VA depending on the output voltage
- Duty: Intermittent duty cycle
- Nature of Cooling: The transformer is cast resin type air cooled
- Motor Operated
45,000.00 ₹ 60,750.00 ₹
6 in stock
Technical data
Specification
Model
50-MOTS
Brand
Metravi
Warranty
One year against manufacturing defects
Related products
-
CALIBRATOR, MV MA WITH LOOP CALIBRATOR, THERMOCOUPLE CALIBRATOR, UNIVERSAL CALIBRATOR, Metravi
CAL-600 Universal Calibrator
CALIBRATOR, MV MA WITH LOOP CALIBRATOR, THERMOCOUPLE CALIBRATOR, UNIVERSAL CALIBRATOR, MetraviCAL-600 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
- Resistance Source: 15Ω ~ 400Ω
- Resistance Measurement: 0Ω ~ 400Ω
- Accuracy: ±0.2%
SKU: n/a -
CALIBRATOR, MV MA WITH LOOP CALIBRATOR, THERMOCOUPLE CALIBRATOR, UNIVERSAL CALIBRATOR, Metravi
CAL-500 Universal Calibrator
CALIBRATOR, MV MA WITH LOOP CALIBRATOR, THERMOCOUPLE CALIBRATOR, UNIVERSAL CALIBRATOR, MetraviCAL-500 Universal Calibrator
- Hand Held, Battery Operated
- Extra Large LCD Display
- Displays both output and measurements
- In the output / measurement mode following are available:
- DC Voltage: 0 – 24mV / 100mV / 15V
- Accuracy: ±0.2%
- DC Current: 0 – 24mA
- Accuracy: ±0.2%
- Step wise output of 4/8/12/16/20/24mA
- Passive Current output: 0 – 24mA
- Accuracy: ±0.2%
- 24V Loop Power Output
SKU: n/a -
CABLE FAULT LOCATOR, DIGITAL CABLE FAULT LOCATOR, Metravi
CFL-01 Cable Fault Locator with Pipe and Cable Tracer
CABLE FAULT LOCATOR, DIGITAL CABLE FAULT LOCATOR, MetraviCFL-01 Cable Fault Locator with Pipe and Cable Tracer
- Consists of a transmitter and a receiver
- Used to detect or trace conductors and to find short faults in them.
- Conductor tracing in the soil
- Detecting fuses and assigning current circuits
- Tracing sockets and distribution sockets having accidentally been covered by plastering
- Detecting interruptions and short-circuits in floor heating
- Tracing metallic water and heating piping
- Automatic and manual sensitivity adjustment
- Acoustic reception signal may be switched off
- Auto-Power-Off function
- Backlit LCD
SKU: n/a -
Battery Impedance Tester, Solar Tools, Metravi
TM-6002 Battery Impedance Tester
- Large Backlit LCD Display
- Data Logging up to 9999 sets
- Resistance Measurement: 10uΩ to 40Ω
- Voltage Measurement: 1mV to 40V
- Temperature Measurement: -20° to 60°C
- DC Current Measurement: 0.6A to 700A DC
- Measures internal impedance and open circuit voltage of the secondary batteries, including Nickel-metal Hydride (NiMH), Nickel-cadmium (NiCd), Lithium-ion (Li-ion), Alkaline and Lead-acid batteries.
- AC four-terminal method to measure the internal impedance by eliminating lead impedance and contact impedance to get accurate results.
SKU: n/a
